engine mount torque specs ( frame slider install)
Hello everyone, I just bought a 2018 gsxs 1000f and was wondering what the torque spec is for the engine mount bolts. I installed shogun frame sliders and have seen and read torque specs from 60 to 40.5 ft lbs for the bolts. Just want to make sure i use the correct torque. I did it by hand tight with a long 8mm hex and wrench and than used a torque wrench and tried tightening it at 60 ft lbs, but my torque wrench would not click and i got nervous, as I did not want to possibly strip the threads on the engine. Any help would be great. I just hit 10 miles on the odometer.