|Topic Review (Newest First)|
|12-21-2018 09:13 PM|
|sveetwin||On the other hand....a PCV does have its benefits. It can be easily installed and unstalled, so when you sell the bike you can recoup some of your investment. You can make adjustments on the fly with autotune, probably the next best thing to getting a custom tune on the dyno. They also make a Quickshifter module for it, completely unnecessary but tons of fun.|
|12-06-2018 09:32 PM|
|Packmule||Danos did a fantastic job, called me and we went over everything before he did the flash, awesome.|
|12-06-2018 07:40 PM|
Thanks this is actually perfect. You answered everything and then some. Sorry for the delay in response forgot my log in info and was to stubborn to reset it lol. Thanks again
Originally Posted by PhuketPaul View Post
|12-06-2018 05:34 PM|
Dano is an actual perf shop. He has done countless gsxr’s not sure if he’s had a gsxs or not on his dyno. But he has the experience from other maps and suzuko Dynos so whether or not he’s had one I don’t think would change much , probably helps that our bikes inherently a 2005 gsxr so really isn’t that much different really I’d imagine?
I was the first adopter here with one or two people, had a slight surge problem on a small opening, but he adjusted them with our feedback and fixed it and everyone after us seems to love it with the new corrected mapping and everything.
I know I do.
|12-06-2018 04:18 PM|
He asked me what mods I have (like exhaust and air filter), I think he pretty much has a base map for our bike from initial Dyno runs on a customer’s bike. Transformed the bike, runs great (like it should).
If you go to his website, go to GSX S1000 Flash, then scroll to the very bottom of that page and you will see the list of what is encorporated in his flash.
|12-05-2018 10:15 PM|
Originally Posted by Rapido1 View Post
|12-05-2018 09:54 PM|
I recommend Dano's Performance for ECU flash $180 US
(Freedom Penguin made me post this)
|12-05-2018 09:46 PM|
I did a decat, and Phuket Paul is right, amazing how much change my PCV and wide band did to the stock map fueling. Made it fatter at the bottom and leaner at the top.
I’d love to share the Map, but, have no way to post them. I would gladly if someone could tell me how.
|12-04-2018 11:06 PM|
Originally Posted by Whatcanisay88 View Post
You will undoubtedly get more power (the top end of the stock bike is fairly rich anyway, but the bottom end of the rev range is already lean for emissions. So fitting a decat will make it slightly worse at the bottom end, unless you flash it and better in the mid range and top end.
Part of the worse bottom end is really just audible - you will hear the bike hunting more at low throttle openings, no stalling but maybe some surging.
Whatever you do, DON'T buy a Power commander, get it reflashed instead - there are not any great maps easily available for the PCV and for significantly less money you can get the ECU flashed that does far far more than a Power Commander can do (Ignition timing, in gear restrictions, fuelling, turning off errors etc). A mail in reflash in normally around 200GBP or 200USD, much less than just the PCV.
Information on upgrading the exhaust here
Information on reflash here
|12-04-2018 09:42 PM|
|This thread has more than 10 replies. Click here to review the whole thread.|