GSXS 1000 Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
860 Posts
Discussion Starter · #1 ·
So I ordered a set of super bright Skene Design's Photon Blasters which include a turn signal function and I would like to remove the stock ones in front. I hate the way they look on the F, reminds me of Micky Mouse ears poking out.

Anyway my questions: Is there something, some kind of plug that can be put in the opening left when the signals are removed? I wouldn't want a hole there. And, What kind if a load device will I need so the signals don't flash in that rapid way they do when a club is removed or burned out.

Any help would be appreciated. Thanks...
 

·
Registered
Joined
·
118 Posts
For the fast flashing rate, you need a 2 Pin Flasher Relay, there's alot of manufacturer in the us for good quality but if you are a eBay buyer, here you go. You replace your OEM relay in the tail section with a new one that is indicated to work with LED

2 pin flasher relay | eBay


for the hole, i've found that R&G are making an adapter for that
Lowest price found of these are at twistedthrottle , here's the link
R&G Front Indicator Adapters for GSX-S1000 '15-'16 | TwistedThrottle.com
 

·
Registered
Joined
·
17 Posts
LED indicators

Hi Guys
Herewith photo of replacement LED indicators I had om my SV1000. Its a perfect fit. The faired version has the exact same cut out.
 

Attachments

1 - 4 of 4 Posts
Top