GSXS 1000 Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Hey gang,
Installing sliders on engine mounts, wondering if anyone can confirm torque setting engine mount bolts ... Gsxr equivalent is 40 ft/lbs .... Thanks!
 

·
Registered
Joined
·
49 Posts
Vagabond frame sliders said 35 Ft lb. When I removed the original bolts they were at least 60 ft lb.
 

·
Registered
Joined
·
189 Posts
Front engine mount 40.0 lb-ft, rear engine mount 60.0 lb-ft
This response could be confusing. The starting post of this thread is referring to installing frame sliders which involves either two or four bolts, depending on the sliders being used. These four bolts are referred to in the Service Manual as "front upper left and right" and "rear upper left and right". The required torque for each of these four bolts 40.5 lbs-ft. See page 1D-36 of the Service Manual.
 
1 - 8 of 8 Posts
Top