[dekker]

Just a talking point, does anyone know where the switch is for the hazard flasher lights?

 

[999]

haven't seen one in person as yet
but if you check the suzuki website you might be able to find out their

 

[dekker]

Solved it. Spotted it on the RH side above the starter button. The only place I have seen it is on YouTube Suzuki's own video https://www.youtube.com/watch?v=pMj148LP5SA

 

[aptiva00]

Just for your info, the US version don't come with the hazard option.

 

[gixxerjasen]

Just for your info, the US version don't come with the hazard option.

Yea, I have them on my other bike. I had big plans to hook up one stock signal and one of my new Rizomas so I could take a video with them operating side by side only to discover after hooking them up that there's no 4 way hazard flasher. Go figure.

 

[dekker]

Ya-all just blew the cobwebs off this thread.
It was started before the bike was released and all we had to satisfy our lust were various pictures. It was a while before we found out the USA bikes had no hazard lights and no immobiliser.
Good to see someone delving into the archives.

 

[gixxerjasen]

Haha, can't accuse people of not using the search feature!

 

[PhuketPaul]

I found it really annoying that only european bikes had Hazard lights so i added them to mine.

Details here

 

[gixxerjasen]

I found it really annoying that only european bikes had Hazard lights so i added them to mine.

Details here

Interesting writeup. Was it not possible to remove the wires/pins from the connector similar to pulling them from the ECU harness? Never tried with those but it seems like it'd make the swap easier. Hmmm.

 

[PhuketPaul]

Interesting writeup. Was it not possible to remove the wires/pins from the connector similar to pulling them from the ECU harness? Never tried with those but it seems like it'd make the swap easier. Hmmm.

I tried but couldn't get them to come out cleanly, unfortunately

 

[levesl]

I have done the same thing, but it was easy to remove the wire from the conectors and reinstall on the wires from the new switch.
So I did not cut the wires. I also add a tree wires conector for the wires from the switch to the turn signals light.

 

[Gixxis1000]

I have done the same thing, but it was easy to remove the wire from the conectors and reinstall on the wires from the new switch.
So I did not cut the wires. I also add a tree wires conector for the wires from the switch to the turn signals light.

What flasher kit did you use for the emergency flashers kit?