[Tlrichard]

Hello all
Im fitting led indicators, fitted rears no problem, however i can't figure out how to get front ones off! Anyone know how to do this.

 

[ackack]

Undo the two screws on top of headlight remove black plastic.
Look down and see 2 large button head sockets, remove these. May need a bit of a wiggle as they sit in rubber bushes.
Headlight will now drop down and you can now undo the nuts holding the indicators on. Connectors are secured at the back of the lamp unit.
Hope this helps.
Headlight is on a type of hinge at the bottom so unless you unplug the headlamp unit will safely hang there.

 

[Tlrichard]

Thanks for that will have a go tomorrow.

 

[gixxerboy09]

as above i fitted led Oxford signal 2 to the bike today as i was doing the tail tidy I have had to order an led flasher relay
weird thing is when the hazards are on it flashes at the correct speed

 

[ackack]

I noticed that. There is another circuit and relay for hazard.
The relay for the indicators is on the right hand side between the two seats.
2 pin type, can be found on ebay for about 2 quid.

 

[tsmetjen]

Does the Suzuki has hazard lights?

 

[ackack]

Yeah on the right hand side, similar to indicator slider.

 

[tsmetjen]

OMG, i drove almost 1500 miles with the bike
I will check tomorrow

Yeah on the right hand side, similar to indicator slider.

 

[ackack]

OMG, i drove almost 1500 miles with the bike
I will check tomorrow

Haha that's crazy.

 

[tsmetjen]

Found them >

Haha that's crazy.

 

[Tlrichard]

Fitted & working cheers

 

[ackack]

Did you modify the existing bracket or buy new ones to fit the front indicators?

 

[Jinxu]

Does the Suzuki has hazard lights?

i dont know why but here in Aus the bike doesnt have hazards