GSXS 1000 Forum banner

Let's see those Bar End Mirrors!!!

18166 Views 39 Replies 22 Participants Last post by  gsx-stanek_22
Wanna see what you guys have. Is going to be one of the 1st things I do.
Yes I can see all the different ones that distributers have, but would like to see photos of them on our bikes before I make a decision.

If you have them, please post'm up! With a description of who's please.

Thanks guys
1 - 20 of 40 Posts
3
CNC Racing Rocket mirrors.
Expensive, but they require no adapters with OEM bar-ends, and I would never go back to stock.

I've had CRG LSs too and they are nice, but require an adapter.

Attachments

See less See more
CNC Racing Rocket mirrors.
Expensive, but they require no adapters with OEM bar-ends, and I would never go back to stock.

I've had CRG LSs too and they are nice, but require an adapter.
So those go between OE bar ends & bolt just goes through.?

Hopefully a few more post, would like to see more options.

Thank you
So those go between OE bar ends & bolt just goes through.?
Yes. You use the bar internals supplied with the mirrors.
Best picture at the moment
Similar but mounted lower and inward. Visibility is surprisingly good with my wider handlebar. Less practical though since it takes your eyes off the front of the road.

I'll see if I can get used to it because I prefer the look. In my youth, I used to only use a single tiny CRG lane splitter bar end mirror on my GSXR. Wasn't too bad then. Of course, never really had to worry about people coming up from behind me in those days.


Sent from my SM-N960U1 using Tapatalk
See less See more
  • Like
Reactions: 1
2
CRG Arrows. Don't have any close ups.

Attachments

See less See more
Similar but mounted lower and inward. Visibility is surprisingly good with my wider handlebar. Less practical though since it takes your eyes off the front of the road.

I'll see if I can get used to it because I prefer the look. In my youth, I used to only use a single tiny CRG lane splitter bar end mirror on my GSXR. Wasn't too bad then. Of course, never really had to worry about people coming up from behind me in those days.


Sent from my SM-N960U1 using Tapatalk
What tank grips are those?
What tank grips are those?
Generic. Top ebay, bottom amazon.I wouldn't recommend either, the top because it's pretty gooey. The bottom one, the glue sheet was peeling off with the cover sheet before I noticed it, maybe a third of the way through.
  • Like
Reactions: 1
3
I just installed the Motogadget m.View Flight glassless bar end mirrors. Let’s see how they hold up, but I think the mirror polished metal finish instead of using glass is really cool.

Attachments

See less See more
Packmule/gsxsdave - what brand?
Packmule/gsxsdave - what brand?
Kemimoto on Amazon for me. $35 I think.

Sent from my SM-N960U1 using Tapatalk
Anyone else? Would love to see some more options.
Mine are just cheapo aliexpress mirrors. Always had decent luck with these.


See less See more
Mine are just cheapo aliexpress mirrors. Always had decent luck with these.


I like the look of those Arrow knockoffs better than the Rizoma knockoffs but I had the mirror ball joint fail on 2 Arrow sets that I had prior to making the switch. The ball joint unglued itself from the shaft after a few adjustments. The Rizoma knockoff joint looks to be better designed to avoid this problem.

Visibility between the 2 are about the same, but the Rizoma style gets glare tinting and plenty of glove clearance if you choose to rotate the mirror inward. The Arrow style, OTOH, lacks both.

Sent from my SM-N960U1 using Tapatalk
Here are mine...Puig fantastic quality and i have had loads...these ones are staying

Land vehicle Vehicle Motorcycle Motor vehicle Car
See less See more
  • Like
Reactions: 1
Here are mine...Puig fantastic quality and i have had loads...these ones are staying
Full Yosh? Or arrow with slupon?

i like the Puig's
Full Yosh? Or arrow with slupon?

i like the Puig's
Full race yoshi
Full race yoshi
very nice! Was gonna go that way, but had to order from Yosh Japan. Only way USA can get them. Who knows how long that would have taken right now. Ended up with full M4
1 - 20 of 40 Posts
Top