GSXS 1000 Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
141 Posts
Discussion Starter #1

·
Registered
Joined
·
647 Posts
I used a blanking cap for a Honda CBR125R only about 1.30 thereabouts and you don't need to use silicon as they cut their own thread and are very tight.
 

·
Registered
Joined
·
336 Posts
I've always just ran down to Lowe's/Home Depot and used these plastic plugs. Typically, they're located in the nut/bolt aisle...with the specialty items in the slide out trays...maybe $1.
 

Attachments

·
Registered
Joined
·
974 Posts
left hand meaning normal thread

also I still can't find these **** things online lol


Go to eBay and type in mirror plugs


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
141 Posts
Discussion Starter #7
they're like $20 on ebay with shipping and all for two dinky plugs, I'll try the home depot option plus I'll have them faster
 

·
Registered
Joined
·
141 Posts
Discussion Starter #10
got 10mm plugs, like body panel plugs, they fit but had to use a rag & a hammer lol, tight fit at 10mm, more like 3/8" so like 9.5mm
looks decent and doesnt stand out too much but then again good luck getting them out later hahah
 
1 - 11 of 11 Posts
Top