[Naked&Afraid]

I got the Vagabond fender eliminator, all went well but while installing the fender eliminator on my I snapped off the screw that holds the left flasher

I simply tightened way too hard and it popped

where can I find the screw for that?

it's one of those pre installed screws I think

 

[sangedegsx]

I just got some led aftermarket signals which are cheap on Amazon and much brighter and sleeker looking. Hated stock signals


Sent from my iPhone using Tapatalk

 

[Naked&Afraid]

link?

 

[Naked&Afraid]

I would like signals that dont need splicing...

 

[Doddy666]

I would like signals that dont need splicing...

You can buy adaptors that fit the stock harness and plug straight into the indicators, never have to cut the stock harness.

Sent from my SM-G935F using Tapatalk

 

[Doddy666]

Look at this on eBay http://www.ebay.co.uk/itm/201282184077

Sent from my SM-G935F using Tapatalk

 

[Naked&Afraid]

yeah ok I found those on this other site too
https://moto911.com/shop/dmp-marker-lights/oem-type-connectors/suzuki-oem-type-marker-light-connectors/

and then just grab any markers they sell, probably those with amber side tips

 

[Naked&Afraid]

but is there any way to just get a new screw in the original turn signal?

 

[Doddy666]

No idea, only things I've taken off mine are the seats

Sent from my SM-G935F using Tapatalk

 

[Naked&Afraid]

guess I need a trip to the dealer to ask the right questions, for now it's holding as I had to force the screw through the vagabond fender eliminator so it's sort of stuck in there

 

[wabill]

guess I need a trip to the dealer to ask the right questions, for now it's holding as I had to force the screw through the vagabond fender eliminator so it's sort of stuck in there

Forcing the fit was the wrong thing to do, you can see that now, right?
Mine was tight also, so reamed the holes large enough for the screw to have a comfortable fit. I mentioned that to Vagabond but have heard nothing back.

 

[Naked&Afraid]

yeah fitting in took some fiddlingbut the mistake I made was that I just kept on tightening, so the screw snapped