GSXS 1000 Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi All
New member here from Blackpool
Problem with traction control when riding light comes on and my gear indicator disappears showing ( - ) and where mileage is the word check appears.
I usually ride with TC on 1 but still does it when TC is off.
A few months back my select button would stay pressed in so I removed control unit from handlebar and blasted it with WD40 and the button has been fine since then.
Also a couple of months ago I had PC5 fitted with remap.
Thanks
 

·
Registered
Joined
·
675 Posts
Can you put it into diagnostic mode and produce fault code?
 

·
Registered
Joined
·
1,379 Posts
Back in 2015 there were a few problems with the LH switchgear and some were replaced under warranty.
I think some of the traction control problems were due to incorrect TPS switch setting rather than the switchgear itself.
I can only suggest you check the gear selector switch.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #4
Thanks guys for info yes will put into dealer mode and try get a fault code
I went on a quick 60 mile round trip tonight on the way there the TC came on a couple of times briefly but on the way back it came on much more and for longer
the bike is a 2016 F model and I’m a complete novice I mean I swapped my indicators for LED ones and that was technical enough lol
How do I check the gear selector switch
Thanks again 👍
 

·
Registered
Joined
·
1,379 Posts
Hope this might help. Pics in random sequence.
43975
43976
43977
43978
 
1 - 7 of 7 Posts
Top