[Robz]

Do you have the spec for the rear brake caliper bolts ?

 

[Beerded Wanderer]

The lower bolt is 22nm/16.5ftlbs the top Allen bolt is 27nm/20ftlbs and the pad pin is 18nm/13.5ftlbs

 

[ChicagoAJ]

If anyone else has anything to add or wants anything added to the original post, please let me know!

 

[twag4]

What is torque for front caliper mounting bolts? It isn’t on the list on the first page.

 

[PhuketPaul]

What is torque for front caliper mounting bolts? It isn’t on the list on the first page.

39Nm or 28lbft

 

[twag4]

39Nm or 28lbft

Thank you, appreciate the information!!

 

[twag4]

Anybody know the clutch spring bolt torque?

 

[PhuketPaul]

10Nm or 7.5lbft

 

[twag4]

10Nm or 7.5lbft

Again, thanks!

 

[twag4]

Can we add clutch spring bolt torque of 7.5 ft/lbs or 10Nm?

 

[MrBulldog1903]

Case cover torque for case protectors?

 

[Kassu]

Tightening torque
Clutch cover bolt (a): 10 N·m (1.0 kgf-m, 7.5 lbf-ft)

Same for the left side.

 

[Razorbak]

Perfect...exactly what I was looking for, Thanks so much!!

 

[Kowens2394]

1st service?

Hi guys new to the forum and this bike. Havent bought a service manual yet, can anyone tell me if there is a valve or shim adjustment done on the first service as per the manual?

 

[Slower and Slower]

Hi guys new to the forum and this bike. Havent bought a service manual yet, can anyone tell me if there is a valve or shim adjustment done on the first service as per the manual?

Your Owners Manual has a chart showing the maintenance timings, so have a read.
My answer would be 'not required' at the 600 M/1000 km first service.
My GSX-S1000 did not have that requirement. The only bike that I owned where this was suggested was the original year Bandit 1250 where Suzuki suggested it rather than mandated it.
If you Dealer is suggesting this, it's a con job on you.

Rob.

 

[lost]

Hi guys new to the forum and this bike. Havent bought a service manual yet, can anyone tell me if there is a valve or shim adjustment done on the first service as per the manual?

No. Inspection is recommended every 15,000 miles (24,000 km).

 

[ChicagoAJ]

Can we add clutch spring bolt torque of 7.5 ft/lbs or 10Nm?

Added

 

[shinto]

2017 gsx-s750 exhaust

would the torque specs for installing a aftermarket exhaust be the same as the on the gsx-s1000