GSXS 1000 Forum banner

1241 - 1260 of 1299 Posts

·
Registered
Joined
·
35 Posts
Swapped out the mirror mount lever brackets for non mirror mount lever brackets.
That looks so clean! I am going to order me some!

Bike is 4 years old, I flushed the coolant and replaced it with the same blue Ecstar super long life thing. Changed the spark plugs (not necessary, they looked great, but since I took it all apart to get to them I figured that I might, as well). Changed the air filter - used the Hiflofiltro OEM equivalent. Wiped clean all the internals that don't get any attention unless the tank is up :). Bike looked and felt happy.
 

·
Registered
2015 GSX-S1000 ABS
Joined
·
1,731 Posts
Fitted Shido Lithium battery, measured 13+Volts (y)
Had pair of Metzeler Roadtec 01 SE fitted, that's my 6th set of Roadtecs but first set of SEs.
Seems like I'm a convert.:)
 

·
Registered
Joined
·
194 Posts
Well today I stripped the bike done done full service, fitted more carbon (ignition cover and tank) and new horn..the carbon needs a little work to fit the rest of fairings to it but not loads just as expected...horn is LOUD....and getting new decals made...few piccys....yes it needs a good clean too
 

Attachments

·
Registered
Joined
·
87 Posts
A bit more bits and bobs arrived.

Installed K&N Airfilter
Closed air filter and installed ECU again
Installed Scoot oiler (fitted perfectly besides rear shock left side, in the bolt hole for the SET valve actuator)
Can you share a photo?
 

·
Administrator
Joined
·
460 Posts
Not so much what I did today - but what I am doing the end of March / early April when the bike comes out of storage. In addition to the usual oil change, fluids, overall inspection, adjusting, tightening etc. I have a list of mods to deal with.
  • Once I finish stripping & polishing, I will reinstall my M4 GP exhaust can (I did not like the black finish), and see if I like the looks and sound with the new "quieter" baffle installed.
  • Install Rhino Bar Ends (weighted) that accommodate my bar end mirrors.
  • Install my Toby Steering Damper.
  • Replace my KN Filter with a Sprint Filter.
  • Install Healtech Brake Light Pro (Brake Light modulation).
  • Add Tank Grip Pads
  • Install Lightech Axle Sliders front & rear (bought 2 sets by mistake, will be selling the black Lightech Axle Sliders which are unopened).
  • Adding a Bodystyle rear seat cowl (in white to match my bike).
  • Replacing OEM rearset with Lightech rearset (OEM will be for sale).
  • Trying a PUIG racing windscreen.
An other items / project I am considering is a 20mm lowering kit.

Depending upon my riding plans & mood, I can easily swap seats (OEM & Corbin); swap windscreens (OEM, Powerbronze, Puig), swap exhaust cans (M4, Holeshot 10" Bad Boy).

Come early - mid April, several items will be for sale; some new, some almost new, some with a little wear & tear.

Thank God for Spring & Summer - might be able to save a couple $$.............
 

Attachments

·
Registered
Joined
·
25 Posts
Not so much what I did today - but what I am doing the end of March / early April when the bike comes out of storage. In addition to the usual oil change, fluids, overall inspection, adjusting, tightening etc. I have a list of mods to deal with.
  • Once I finish stripping & polishing, I will reinstall my M4 GP exhaust can (I did not like the black finish), and see if I like the looks and sound with the new "quieter" baffle installed.
  • Install Rhino Bar Ends (weighted) that accommodate my bar end mirrors.
  • Install my Toby Steering Damper.
  • Replace my KN Filter with a Sprint Filter.
  • Install Healtech Brake Light Pro (Brake Light modulation).
  • Add Tank Grip Pads
  • Install Lightech Axle Sliders front & rear (bought 2 sets by mistake, will be selling the black Lightech Axle Sliders which are unopened).
  • Adding a Bodystyle rear seat cowl (in white to match my bike).
  • Replacing OEM rearset with Lightech rearset (OEM will be for sale).
  • Trying a PUIG racing windscreen.
An other items / project I am considering is a 20mm lowering kit.

Depending upon my riding plans & mood, I can easily swap seats (OEM & Corbin); swap windscreens (OEM, Powerbronze, Puig), swap exhaust cans (M4, Holeshot 10" Bad Boy).

Come early - mid April, several items will be for sale; some new, some almost new, some with a little wear & tear.

Thank God for Spring & Summer - might be able to save a couple $$.............
That M4 looks pretty awesome stripped. Where can I find that specific rear seat cowl? I want one in white.
 

·
Registered
Joined
·
58 Posts
Hi guys,
Here's my mods.

Tail tidy
Led blinkers
Seat cover
Ermax wind shield
Translogic quick shifter
Philips X-Treme vision head lamps
Alarm
Tank protection pad
K-Tech Razor R rear shock absorver
Evotech radiator protection
Sprint Filter air filter and air box plate removed
Lextek headers (O2 sensor and exhaust valve removed)
Remap

Screenshot_20210311-005516_Adobe Acrobat.jpg

20210306_164816.jpg

20210307_181819.jpg


20200824_161559.jpg

20200318_171456.jpg
20210307_181808.jpg
20200403_223018.jpg
20200417_193509.jpg


20200309_185156.jpg

20200317_182402.jpg

20200318_171456.jpg
 

·
Registered
Joined
·
87 Posts
Hi guys,
Here's my mods.

Tail tidy
Led blinkers
Seat cover
Ermax wind shield
Translogic quick shifter
Philips X-Treme vision head lamps
Alarm
Tank protection pad
K-Tech Razor R rear shock absorver
Evotech radiator protection
Sprint Filter air filter and air box plate removed
Lextek headers (O2 sensor and exhaust valve removed)
Remap

View attachment 45096

View attachment 45094

View attachment 45093


View attachment 45092

View attachment 45085
View attachment 45095
View attachment 45089
View attachment 45088


View attachment 45087

View attachment 45086

View attachment 45085
Wow wow wow, really nice set!
You MUST send a soundcheck video!
 

·
Registered
Joined
·
866 Posts
Sweet garage.. fancy gold chain but bright orange fugly reflectors are hurting my feelings
 
1241 - 1260 of 1299 Posts
Top